|
Need an industrial grade adhesive filler for your automotive and industrial needs? Get Rapid Patch®. |
What is Rapid Patch® High Performance Epoxy Adhesive Repair Compound?
When you need a smooth, sandable and paintable repair, RapidPatch® is the adhesive repair compound that you need. With five types of RapidPatch® available, we have what you need for your next plastic repair / chemical weld. Millions of pounds of these products have been produced worldwide, for autobody shops, agricultural and industrial purposes, etc.
Available in 4 Litre (1 gallon), 10 Litre (2.5 gallon) cans, or convenient 300 mL (10 oz.) tubes. All products are also available in bigger bulk sizes. Please call to talk to a representative about pricing and volume discounts.
A RapidPatch two-part epoxy kit comes with both Part A (resin blend) and Part B (hardener blend). See product list below.
Products :
Contact us for pricing; distributor pricing available
RapidPatch® Rigid XL Epoxy is our newest structural 100% cross-link epoxy semi-rigid finishing filler. This product has similar adhesive properties as our fibre product, but finishes repaired areas to an ultra fine finish. RP Rigid is a must in finishing coarse repairs, and can also be used in polyester or metal repairs. RP Rigid exhibits superior peel strength. Used in mining, oilfields, AG., marine, fiberglass/composite, agricultural, applications. Endless uses, & tough.
RapidPatch® Flexible and Semi-Flexible Epoxy is a flexible matrix finishing filler. This product exhibits good flexibility and adhesion. RP Flexible can be used on most flexible/semi-rigid repairs, such as: polyurethane, polypropylene, EPDM, modified polycarbonate, TPO, etc. This product exhibits excellent lap-shear and peel strength. This finishing flexible epoxy adhesive is excellent for repairing bumpers.
How to use RapidPatch® Epoxy Adhesives?
1) Remove frayed areas to be repaired. Rough sand damaged area to be repaired with 40-60 grit sand paper. All joints should be tapered type. Weld or back area to be repaired with our self-adhesive fiberglass reinforcement tape, product number RT890, for added structural integrity.
2) Mix product 1:1 on a plastic mixing board and apply to area of repair with a rubber or plastic applicator. Allow (45-60 minutes) before sanding. Rough sand with 80 grit sand paper. Re-apply if necessary.
3) To finish sand, begin with 150-180 grit sand paper. If necessary, finish sand to 400 grit. Be careful, as material has a high resin content, glazing may occur if sanded too fine.
4) You are now ready to prime and colour coat with either waterborne or solvent-based coatings.
NOTE: Solvent preparations are not necessarily recommended, as mold release agents can contaminate your repair causing poor adhesion. Sanding is normally sufficient. Do not touch finished area with your hands or other media prior to application of the adhesive fillers or painting.
Caution
In rare cases, these products may cause slight skin sensitivity. For the affected area, wash with warm water and mild soap. Apply lotion or barrier cream. Use a dust mask when sanding. This is a non regulated product.
When you need a smooth, sandable and paintable repair, RapidPatch® is the adhesive repair compound that you need. With five types of RapidPatch® available, we have what you need for your next plastic repair / chemical weld. Millions of pounds of these products have been produced worldwide, for autobody shops, agricultural and industrial purposes, etc.
Available in 4 Litre (1 gallon), 10 Litre (2.5 gallon) cans, or convenient 300 mL (10 oz.) tubes. All products are also available in bigger bulk sizes. Please call to talk to a representative about pricing and volume discounts.
A RapidPatch two-part epoxy kit comes with both Part A (resin blend) and Part B (hardener blend). See product list below.
Products :
Contact us for pricing; distributor pricing available
RapidPatch® Rigid XL Epoxy is our newest structural 100% cross-link epoxy semi-rigid finishing filler. This product has similar adhesive properties as our fibre product, but finishes repaired areas to an ultra fine finish. RP Rigid is a must in finishing coarse repairs, and can also be used in polyester or metal repairs. RP Rigid exhibits superior peel strength. Used in mining, oilfields, AG., marine, fiberglass/composite, agricultural, applications. Endless uses, & tough.
RapidPatch® Flexible and Semi-Flexible Epoxy is a flexible matrix finishing filler. This product exhibits good flexibility and adhesion. RP Flexible can be used on most flexible/semi-rigid repairs, such as: polyurethane, polypropylene, EPDM, modified polycarbonate, TPO, etc. This product exhibits excellent lap-shear and peel strength. This finishing flexible epoxy adhesive is excellent for repairing bumpers.
How to use RapidPatch® Epoxy Adhesives?
1) Remove frayed areas to be repaired. Rough sand damaged area to be repaired with 40-60 grit sand paper. All joints should be tapered type. Weld or back area to be repaired with our self-adhesive fiberglass reinforcement tape, product number RT890, for added structural integrity.
2) Mix product 1:1 on a plastic mixing board and apply to area of repair with a rubber or plastic applicator. Allow (45-60 minutes) before sanding. Rough sand with 80 grit sand paper. Re-apply if necessary.
3) To finish sand, begin with 150-180 grit sand paper. If necessary, finish sand to 400 grit. Be careful, as material has a high resin content, glazing may occur if sanded too fine.
4) You are now ready to prime and colour coat with either waterborne or solvent-based coatings.
NOTE: Solvent preparations are not necessarily recommended, as mold release agents can contaminate your repair causing poor adhesion. Sanding is normally sufficient. Do not touch finished area with your hands or other media prior to application of the adhesive fillers or painting.
Caution
In rare cases, these products may cause slight skin sensitivity. For the affected area, wash with warm water and mild soap. Apply lotion or barrier cream. Use a dust mask when sanding. This is a non regulated product.
